Mesoscopic nonequilibrium thermodynamics treatment of the grain boundary thermal grooving induced by the anisotropic surface drift diffusion

A systematic study based on the self-consistent dynamical simulations is presented for the grain boundary thermal grooving problem by strictly following the irreversible thermodynamic theory of surfaces and interfaces with singularities [T. O. Ogurtani, J. Chem. Phys. 124, 144706 (2006)]. This approach furnishes us to have auto-control on the otherwise free-motion of the grain boundary triple junction without presuming any equilibrium dihedral (wetting) angles at the edges. The effects of physicochemical properties and the anisotropic surface diffusivity on the transient grooving behavior, which takes place at the early stage of the scenario, were considered. We analyzed the experimental thermal grooving data reported for tungsten in the literature, and compared them with the carried simulation results. This investigation showed that the observed changes in the dihedral angles are strictly connected to the transient behavior of the simulated global system, and manifest themselves at the early stage of the thermal grooving phenomenon.     

A team-oriented design methodology for mixed model assembly systems

Team-oriented approaches are widely being used in modern real life assembly systems, as are other modern systems. In this paper, first the literature of single and mixed model assembly line balancing, which plays an important role for the design of assembly systems, is reviewed. The associated literature matrixes reveal that team-oriented approaches do not have an intensive research area. Second, a team-oriented mathematical programming model for creating assembly teams (physical stations) in mixed model assembly lines is devised. Owing to the fact that this model is NP hard, a scheduling based heuristic algorithm is developed. The mixed model assembly line design methodology, which includes a team-oriented algorithm as a step, is proposed. Both model sequencing and worker transfer systems are included in the methodology. The algorithms for each step of the methodology are also coded by using MATLAB and MS Excel is used as the user interface. Furthermore, the presented methodology was applied in a chosen segment of a real life mixed model tractor assembly system.     

Modifying of Cotton Fabric Surface with Nano-ZnO Multilayer Films by Layer-by-Layer Deposition Method

ZnO nanoparticle–based multilayer nanocomposite films were fabricated on cationized woven cotton fabrics via layer-by-layer molecular self-assembly technique. For cationic surface charge, cotton fabrics were pretreated with 2,3-epoxypropyltrimethylammonium chloride (EP3MAC) by pad-batch method. XPS and SEM were used to examine the deposited nano-ZnO multilayer films on the cotton fabrics. The nano-ZnO films deposited on cotton fabrics exhibited excellent antimicrobial activity against Staphylococcus aureus bacteria. The results also showed that the coated fabrics with nano-ZnO multilayer films enhanced the protection of cotton fabrics from UV radiation. Physical tests (tensile strength of weft and warp yarns, air permeability and whiteness values) were performed on the fabrics before and after the treatment with ZnO nanoparticles to evaluate the effect of layer-by-layer (LbL) process on cotton fabrics properties.     

艾哈迈德·阿德南·萨伊贡艺术中心,伊兹密尔,土耳其

<正>一座建筑的性能应当如何来衡量?除了通过统治当代建筑舆论的美学、技术以及经济价值来进行描述之外,我们还能够如何来阐释一座建筑,尤其是一座致力于庇护那些渴望展现自己的艺术家的建筑?有人会问成功的表演是如何实现的,表演者是如何进行伪装的、又是如何展现自己的?根据海德格尔的理论,当我们看不到钉子的时候,铁锤的表现才是成功的;钉子本身的出现通常表明出现了问题。     

Consistency and Reliability of Construction Arbitration Decisions: Empirical Study

While construction arbitration is analyzed in a plethora of information, there is a paucity of hard data about the consistency and reliability of the construction arbitration decision. The assumption that an industry familiar adjudicator will provide a reliable and consistent decision in comparison with the expectation of the industry as a whole has not been tested. This paper presents the results of a study on the reliability and consistency of construction arbitration through the examination of a variety of arbitrators’ decisions on the same construction dispute scenario. Data was collected from attorneys, owners, owner representatives, contractors, and subcontractors. Compilation of the survey results finds little consistency in the arbitrator’s awards, but with much thoughtful care in award consideration. The results suggest that the arbitrator’s industry background does not influence the arbitrator’s award. There is also no significant award bias due to the arbitrator’s education level or years spent in construction business. The results also indicate that previous arbitration experience does not predict the award outcome. This paper concludes that construction arbitration is wholly unpredictable. However, the result will be a well-reasoned and unbiased decision.     

Cost assessment and evaluation of various hydrogen delivery scenarios

In this paper, performance and cost assessment studies, including the stages of hydrogen storage, transmission and distribution of three different hydrogen delivery pathways are undertaken comparatively. The produced hydrogen is stored under different temperatures and pressures and then transported to the nearby cities for distribution. In addition, three different methods for the transportation of the produced hydrogen to the distribution centers are studied, which are as transportation for hydrogen by the pressurized tanks, cryogenic liquid hydrogen tanker and the gas pipelines. Moreover, the transmission options from the distribution center to the target consumer are also examined for three different conditions. As a result, the hydrogen production capacity, the levelized cost of energy distribution (in $/kg), the infrastructure costs (truck, tanker number, gas line costs, etc.) for the selected transmission scenario are calculated. Furthermore, the environmental impact (greenhouse gas (GHG) emissions) and some application parameters of the proposed system (e.g., number of hydrogen fuel stations and the distance between the stations, length of the distribution lines, etc.) are also determined. The highest levelized cost of delivery is obtained as 8.02 $/kg H₂ for the first scenario whereas the lowest cost is obtained as 2.73 $/kg H₂ for the third scenario.     

Analysis and performance assessment of a combined geothermal power-based hydrogen production and liquefaction system

In this paper, the thermodynamic study of a combined geothermal power-based hydrogen generation and liquefaction system is investigated for performance assessment. Because hydrogen is the energy of future, the purpose of this study is to produce hydrogen in a clear way. The results of study can be helpful for decision makers in terms of the integrated system efficiency. The presented integrated hydrogen production and liquefaction system consists of a combined geothermal power system, a PEM electrolyzer, and a hydrogen liquefaction and storage system. The exergy destruction rates, exergy destruction ratios and exergetic performance values of presented integrated system and its subsystems are determined by using the balance equations for mass, energy, entropy, energy and exergy and evaluated their performances by means of energetic and exergetic efficiencies. In this regard, the impact of some design parameters and operating conditions on the hydrogen production and liquefaction and its exergy destruction rates and exergetic performances are investigated parametrically. According to these parametric analysis results, the most influential parameter affecting system exergy efficiency is found to be geothermal source temperature in such a way that as geothermal fluid temperature increases from 130 °C to 200 °C which results in an increase of exergy efficiency from 38% to 64%. Results also show that, PEM electrolyzer temperature is more effective than reference temperature. As PEM electrolyzer temperature increases from 60 °C to 85 °C, the hydrogen production efficiency increases from nearly 39% to 44%.     

Effect of hydrogen addition using on-board alkaline electrolyser on SI engine emissions and combustion

In this study, an electrolyser was used to supply hydrogen to the SI engine. Firstly, the appropriate operation point for the electrolyser was determined by adjusting the amount of KOH in the electrolyte to 5%, 10%, 20% and 30% by mass, and applying 12 V, 16 V, 20 V, 24 V and 28 V voltages. Tests were first carried out with the gasoline without the use of an electrolyser, followed by operating the electrolyser at the appropriate point and sending obtained H₂ and O₂ to the engine in addition to the gasoline. The SI engine was operated between 2500 rpm and 3500 rpm engine speeds with and without hydrogen addition. Cylinder pressure, the amount of gasoline, H₂ and O₂ consumed by the engine and the emission data were collected from the test system at the aforementioned engine speeds. Furthermore, indicated engine torque, indicated specific energy consumption, specific emissions and HRR values were calculated. According to the results obtained, improvement in ISEC values was observed, and CO and THC values were improved by up to 21.3% and 86.1% respectively. Even though the dramatic increase in NO_x emissions cannot be averted, they can be controlled by equipment such as EGR three-way catalytic converter.     

A systematic comparative study of the efficient co-catalyst-free photocatalytic hydrogen evolution by transition metal oxide nanofibers

The efficiencies of a series of hydrogen evolving catalysts based on metal oxide nanofibers (NiO, Co₃O₄, Mn₃O₄) are investigated for the photocatalytic hydrogen evolution from water without using any co-catalyst under the visible light irradiation by using triethanolamine (TEOA) as an electron donor and Eosin-Y (EY) dye as a photosensitizer. It is found that the photocatalytic hydrogen evolution activities follow the order as: Mn₃O₄<Co₃O₄<NiO (196 μmolg^?1h^?1, 5552 μmolg^?1h^?1, 7757 μmolg^?1h^?1, respectively). Moreover, the catalytic behavior of these nanofibers on the hydrogen production has been also compared to bulk forms of NiO, Co₃O₄ and Mn₃O₄ by producing hydrogen 937 μmolg^?1h^?1, 901 μmolg^?1h^?1 and 135 μmolg^?1h^?1, respectively. The nanofiber structures demonstrated much higher photocatalytic activity than bulk forms due to the effect of the increased surface to volume ratio deduced from the fibrous character. The photocatalytic plausible pathway for the hydrogen production is also discussed.